GoBearings.com
A comprehensive engineers' reference source for radial ball bearings and thrust ball bearing

 


  R SERIES BEARINGS  

 FLANGED BEARINGS SHIELDED
   

The table below shows available bearings of the type you have selected. Basic dimensions and load ratings are given. To complete the bearing selection process CLICK ON THE PART NUMBER of the bearing that best meets your application (left column). This will take you to the DETAILED SPECIFICATION page where you will make final selection of other important bearing parameters.

Dimensions in Inches
Dynaroll
Bearing No.
BORE
OUTSIDE
DIAMETER
WIDTH
STATIC LOAD
Lbs.
DYNAMIC LOAD
Lbs.
   Material Standard SAE 52100
   Stainless Steel available upon request

The R-Series bearings are single row, inch series bearings available from 1/8 through 1-1/2 inch bore sizes. The Conrad construction of these bearings enables them to accept thrust as well as radial load. Their ball complement and selection of retainers also allows them to work well in high-speed applications. R series bearings are available in open, sealed and shielded configurations. Sealed and shielded bearings may be slightly wider as shown in the table. This series is also available in stainless steel.






Bearing Overview || Materials || Cages and Retainers || Shields and Seals || Bearing Geometry || Abec Tolerance
Lubrication || Load Rating and Lifetime || Bearing Failure || Noise || Torque || Mounting and Fitting
Preload || Bearing Handling || Adhesive Practices || Assembly Characteristics || Specify a Bearing || News

Dynaroll Copyright 2005