GoBearings.com
A comprehensive engineers' reference source for radial ball bearings and thrust ball bearing

 


  1600 SERIES BEARINGS  

 STANDARD BEARINGS SEALED
   

The table below shows available bearings of the type you have selected. Basic dimensions and load ratings are given. To complete the bearing selection process CLICK ON THE PART NUMBER of the bearing that best meets your application (left column). This will take you to the DETAILED SPECIFICATION page where you will make final selection of other important bearing parameters.

Dimensions in Inches
Dynaroll
Bearing No.
BORE
OUTSIDE
DIAMETER
WIDTH
STATIC LOAD
Lbs.
DYNAMIC LOAD
Lbs.
  * Width RS & 2RS = 5/16
  ** Width RS & 2RS = 5/16


   Material Standard SAE 52100
   Stainless Steel available upon request

The 1600 Series bearings are designed to be dimensionally interchangeable with standard domestic inch series bearings. They incorporate 52100 steel and ABEC1 tolerances, allowing them to offer economy with electric motor quality. Improved ball complement and close tolerances also increase their load capacity. This series is available in open, sealed and shielded configurations.






Bearing Overview || Materials || Cages and Retainers || Shields and Seals || Bearing Geometry || Abec Tolerance
Lubrication || Load Rating and Lifetime || Bearing Failure || Noise || Torque || Mounting and Fitting
Preload || Bearing Handling || Adhesive Practices || Assembly Characteristics || Specify a Bearing || News

Dynaroll Copyright 2005